How to Set Up and Configure Your D-Link DAP-1520 Wi-Fi Extender

 

Your current Wi-Fi network's coverage may be increased with the DLink Extender 1520 setup. 

• Using a web browser to set up the DAP 1520 is simple. 

• First make sure the DAP 1520 is within range of the Wi-Fi signal from your main network by plugging it into an electrical outlet. 

• After turning it on, watch for the LED on the gadget to start flashing. 

• Next connect your computer or mobile device to the "dlink_ext" Wi-Fi network which is the DAP 1520's default network.

• Open a web browser after connecting then enter dlinkap.local in the address box. 

• This will direct you to the DAP 1520's login page. You may also try 192.168.0.50 as the default IP address if dlinkap.local isn't working.

•  If you haven't updated the username and password in the past they are often "admin" for both fields.

• Once you've logged in choose your home Wi-Fi network and enter the password by following the prompts. 

• This will enable DAP 1520 to increase the coverage of your current Wi-Fi network.

•  After the configuration is finished the device will reboot and when the extender is successfully connected to the network the LED will turn solid blue.

•  After setup you may position the extender to maximize coverage usually midway between your router and the poor signal region.

•  If the router includes a WPS button the DAP 1520 can also support WPS for faster setup.

• You can quickly improve coverage in your house or workplace and increase the network's range by following these easy steps.

Visit our website to learn more. Also Read:
Need a Fresh Start? How to factory reset your dlink extender Dlink Extender Login Guide